Languages

FIXTURLASER SMC with EX version

Fixturlaser SMC - automatic diagnosis of machine faults

Like no other, the FIXTURLASER SMC is a portable, machinery diagnostic tool that allows mechanics and maintenance technicians to check the health of any rotating machine, as needed, in a matter of minutes.
It requires no special training or certification and generates straightforward, simple machine diagnostic reports with both confidence and severity levels.

Fast, accurate machinery diagnostics in 3 simple steps

  • Select the machine you want to diagnose from the device.  
  • Take readings at each of the automatically designated points.
  • View the machine diagnostic report to learn what is wrong and what you need to fix.

in the case

FIXTURLASER SMC EX
The FIXTURLASER SMC  is also available as EX system, FIXTURLASER SMC EX EX - ATEX Zone II 3 G Ex ic IIC T4Gc (ZONE II Industry where explosive atmosphere, consisting of a mixture of air and combustible material in the form of gases, smoke or fog, is likely to be formed sometimes during normal operation. Mines excluded.) It has the same performance and capabilities as the FIXTURLASER SMC.

Accurex™ - Automatic machine diagnosis 

FIXTURLASER SMC unique automatic machine diagnostic Accurex ™ is built into the FIXTURLASER SMC. The innovative machine diagnostics feature provides unbeatable fast, relevant and reliable results for a wide range of machine problems such as unbalance, alignment errors, cavitation, structural resonances, bearing problems, and more. FIXTURLASER SMC machine diagnostic function differs from all other systems.

Built-in Stroboscope

The built-in stroboscope makes it easy to pinpoint the RPM which is crucial for securing an accurate diagnosis.

Built-in stroboscope

Built-in camera

For easy machine identification, sensor positioning, and report illustration

Three-axis wireless sensor

The FIXTURLASER SMC wireless tri-axial sensor will take readings in the vertical, horizontal and axial direction simultaneously making the measurement process fast and easy.

Built-in camera

Built-in laser pyrometer 

The FIXTURLASER SMC has a built-in laser pyrometer that makes it easy to take the temperature of your machine to verify your diagnosis.

Built-in Pyrometer

Fixturlaser SMC Balancing KIT (Accessories)

The FIXTURLASER SMC Balancing is a powerful balancing tool, smart and easy to use. FIXTURLASER SMC Balancer guides the user throughout the process and automates all calculations. The user is led through the user-friendly visual interface to define the machine, configure the speed counter, and select test weights. Following the measurement procedure, the balancing instrument presents the correct correction weights.

FIXTURLASER SMC Balancing is available in balances for 1 plane, 2 plane balancing.

Fixturlaser SMC balancing

 WHAT'S IN THE CASE?

FIXTURLASER SMC

FIXTURLASER SMC - Package with Case

FIXTURLASER SMC display unit
FIXTURLASER SMC sensor
USB cable for the wireless sensor (power supply)
6 pcs of adapters
FIXTURLASER SMC power supply
Wireless sensor power supply
Universal tool

technical specification

FIXTURLASER SMC PACKAGE

Touchscreen

Graphic color touchscreen
Resolution: 800 x 480 pixels 
Dimension: 154 x 92 mm (D7”)
Adjustable brightness 
Can be used outdoors
Icon functions

Touch keyboard

On touchscreen:

  • 10 contextual function keys
  • Functions are organized for single-hand measurement (left or right)
  • Direct access to general functions: Home, Help, Setup, Screen copy, Picture, Bar code reader, Text note, Audio comment, Pyrometer, Stroboscope
  • Full keyboard for text input. Several keyboards available: qwerty, azerty, Chinese…

Acquisition 

Synchronous on 4 channels + trigger input
24-bits conversion
Sampling frequency: 

  • 102.4 kHz for each channel
  • Up to 204.8 kHz on 1 channel

Antialiasing filter
Wireless acquisition with FIXTURLASER SMC WLS triaxial accelerometer 
Digital signal processors
Real-time processing: 

  • 40 kHz on 4 channels
  • Up to 80 kHz on 2 channels

Memory: 3.5 GB for measurements 

Communication 

USB 2 type B device (direct connection to PC)
USB 2 type A host (for USB stick)
Ethernet
Wi-Fi

Battery

Autotest and calibration function
High-density Li-Ion type 
Rechargeable without removing
Battery lifetime: 10 hours under intense use
Programmable automatic standby mode and switch-off 

Analog Inputs

Up to 4 programmable signal inputs (depending on instrument option):

  • Frequency range: 0 - 40 kHz on 4 channels, 80 kHz on 1 channel 
  • Overload indicator in % with memorization
  • IEPE interface with real-time integrity control, range ± 8V (power supply: 4 mA constant current 23 VDC)
  • Dynamic signal measurements (acceleration, vibration velocity, absolute displacement, relative displacement, electrical current, etc.)
    • +/- 10 VAC
    • 0, -24 V for proximity probes (a -24Vdc power supply is available on each channel)
  • Input impedance AC/DC: 100 kΩ
  • Accuracy: +/- 1% 
  • Sensors without electronics with optional charge amplifier
  • DC input: from -24 VDC to +24 VDC for measurements of position and process parameters
  • AC coupling: 0.3 Hz
  • Compatible with triaxial sensor

Trigger input:

Range: +/- 10 V, 0 to +24 V, 0 to – 24 V
Adjustable triggering parameters
Automatic setup function
For rotation speed measurement, synchronous analysis, balancing, order analysis. 
Input impedance: 100 kΩ
+ 5 Vdc power supply for tacho probe
-24 Vdc power supply for proximity probes

Microphone input 

Microphone input for audio inspection notes

Analog OUTPUTS

1 headphone output to listen sensor signal, recorded signal or audio inspection notes
1 stroboscope output: TTL
For each channel and trigger input: 
-24 Vdc power supply for proximity probe

BUILT-IN PYROMETER WITH LASER-SIGHTING  

Contactless temperature measurement:

  • Range: 0 to 200°C
  • Accuracy: +/- 3°C for ambient temperature ranging from 18°C to 28°C.
  • Resolution: 0.5°C
  • Repeatability: +/- 1°C
  • Field of view: 5° @ 50%
    (∅ target ≃ 4 cm @ 50 cm)
  • Time response: 1 s
  • Fixed emissivity: 95%

BUILT-IN STROBOSCOPE

Rotation speed measurement:

  • Range: 30 to 15000 RPM
  • Automatic setting to machine speed predefined in setup
  • Adjustment:
    • ½, x2
    • Fast
    • Fine
  • Flash duration: adjustable from 0.5 to 15°
  • Can be used independently or to adjust rotation speed in a route or from a spectrum display

Built-in camera

Resolution: 640 x 480
Autofocus
Distance: 20 cm to ∞
Flash mode 

Identification of measurement point

Built-in bar code reader 
Reading distance: from 20 cm to 50 cm according to code dimension
Bar code format: QRcode
Learning mode to avoid codes manual input

Mechanical/environment

Protection: IP65. 
Case with shock protection rubber 
Shock protection: 1.2 m drop  (1 m for EX version)
Standard compliance:  

  • Safety: IEC61010-1
  • EMC: directive 2004-108-CE 

Dimensions: 200 x 265 x 65 mm
Weight: 1.8 kg including battery and rubber protection
Operating temperature: -10°C to 55°C
Humidity: 95% no condensation

FIXTURLASER SMC-EX, intrinsically safe version: 

ATEX  certification: EX II 3 G, EEx ic IIC T4 supplied with certified accessories.
IECEX certification (pending)

Note: shock protection: 1 m drop. The protection screen accessory cannot be used in dangerous areas and is not supplied.

 

Remote access

The FIXTURLASER SMC can be set up so as to communicate with your network through its Ethernet or Wi-Fi interface and used as a remote station. You can then use the applications installed on your computer directly from the FIXTURLASER SMC (SUPERVISION, CMMS…).

 

Accessories

FIXTURLASER SMC Balancer Kit

Wired triaxial sensor kit

 

Fixturlaser SMC Balancer/also available in ex version

An upgrade kith with laser tachometer with cable for connection on channel C, supplied with a 5m extension cable.
USB cable for connecting the Fixturlaser SMC to a computer (reports)
Magnet holder 2 ASH accelerometers, 2 straight cables for ASH, 2 high-power magnets for ASH.

FIXTURLASER SMC Balancer is also available as EX system EX - ATEX Zone II 3 G Ex ic IIC T4Gc, with the same performance and capabilities as the regular FIXTURLASER SMC Balancer (ZONE II Industry where explosive atmosphere, consisting of a mixture of air and combustible material in the form of gases, smoke or fog, is likely to be formed sometimes during normal operation. Mines excluded.

Wired triaxial sensor kit

Also available in an EX version.

 

 

Audio adapter

Also available in an EX version.