FIXTURLASER NXA Ultimate

With the FIXTURLASER NXA Ultimate you have covered any kind of angle that needs to be covered of your machinery. It includes shaft alignment applications as well as geometric applications, hence, as the name says, it is an ultimate measurement tool.

Ultimate Measurement Tool for Optimal Operation Conditions

With a mix of shaft alignment and geometry applications, you are safeguarding your machinery’s operation condition. Regular maintenance checks or installations of new machinery, you have what you need in the FIXTURLASER NXA Ultimate.

Machine foundations need to be checked for any flatness faults, before the machine is actually installed, hence the flatness application. And once installed, the machine’s alignment status must be measured. With everything verified to be perfectly aligned, you can also ensure the machinery’s optimal operation conditions.

Shaft Alignment

The FIXTURLASER NXA Ultimate comes with technology enabling functions and capabilities, which in many cases are industry firsts, for example:

CCD detectors with ultra high definition resolution.
New sensor units with Bluetooth incorporated are the industry’s most compact, yet, they feature a 30 mm detector surface and line lasers.
The OmniView feature keeps track of the position of both the user and the machine to show the screen display from the user’s perspective, thanks to the built-in gyroscope (6-axis MEMS Inertial Motion Sensor) in the display unit.
OMNIVIEW – Shows the screen from the user's perspective
Ability to keep track of the position of the sensors in both the vertical and horizontal orientation, and any inclination in-between, when performing a shaft alignment, thanks to the built-in gyroscope in the sensor units. Hence, you are then able to perform a shaft alignment on vertically mounted machines where it is not possible to do a 180° shaft rotation.
Excellent power management – 10 hours on one charge.

Geometric Measurements

FIXTURLASER’s laser-based geometry system is characterized by its user-friendliness and versatility, such as:

The graphic user interface is intuitive and 3D animated, with icons and color-coded symbols to guide you throughout the measurement and alignment process.
Live values during measurement and simultaneous live adjustment, in both vertical and horizontal orientation (X and Y values), during the adjustment process.
Measurement results in micron resolution.
Post-measurement evaluation means that you can process saved measurement results in order to choose the best reference. This will result in as few corrections as possible.

limited LIFETIME WarrAnty

The FIXTURLASER NXA Ultimate has a limited lifetime warranty. Contact your local dealer for more details!

Downloads

Fixturlaser NXA Ultimate Product Brochure

Fixturlaser NXA Geometry Product Brochure

Fixturlaser NXA Manual

Fixturlaser NXA Geometry Manual

What's in the case?

FIXTURLASER NXA Ultimate

FIXTURLASER NXA Ultimate
Package with Case

Display unit

2 pcs of digital smart sensors

2 pcs of complete V-brackets with chains

2 pcs of magnetic V-brackets

2 pcs of chains 8 mm 60 links

Rod kit

Extension fixture, 49 mm

Magnetic base

R2 sensor/receiver

Turnable sensor holder on magnetic base

T21 transmitter with mounting magnet

2 pcs of angled tools

Tape measure 5 m

USB stick

Chargers for display unit and sensors

FIXTURLASER NXA Shaft alignment manual - English version

FIXTURLASER NXA Geometry manual - English version

Dimensions

NXA_dimensions

Technical specification

Fixturlaser NXA Ultimate
Weight including all standard parts	7,7 kg (17 lbs)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material	High Impact ABS Plastic
Weight (empty)	2,5 kg (5,5 lbs)
Environmental protection	Dust-, Water- (5m), Air-tight with air pressure compensation valve
Drop-test (empty)	3m onto concrete floor
Storage Temp(empty)	-40 to +80 °C
Dimension	415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

Display Unit
Housing material	Brushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating temp	-10 to 50°C ( 14 to 122°F)
Battery charging temp, system off	0 to 38°C ( 32 to 100°F)
Battery charging temp, system on	0 to 32°C ( 32 to 90°F)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Relative humidity	10 – 90%
Weight	1,2 kg (2,6 lbs) with battery
Dimensions	124 mm x 158 mm x 49 mm (4,9 in x 6,2 in x 1,9 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Processor	1 GHz Dual-core main processor with ultra low power core for instant power management
RAM memory	256 Mb
Flash storage memory	8 Gb, >100 000 measurements
Display	Colour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology
Display size	6,5” (165mm) diagonal (133 x 100 mm)
Display resolution	Full VGA 640 x 480 pixels
Color depth	262 000 colors
Interface	6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.
Peripherals – User accessible	1 USB 2.0 Master port (IP 67) 1 Power/Charger connector 10-14V DC (IP 67)
Peripherals – Distributor accessible	1 Ethernet 10/100BaseT RJ45 1 HDMI port (DVI compatible) 1 Service port
Wireless communication	Class I Bluetooth transmitter with multi-drop capability
Power supply	High performance, High-Temperature rechargeable Li-Ion battery or external power supply
Operating time	10 hours continuous use (with 50% LCD backlight)
Battery charging time (system off, room temperature)	5 h
Xpress battery charging time (system off, room temperature)	1 h charge – 5 hours operating time
LED indicators	Unit state and 2 x 5 battery state indicators with instant battery check

Digital Laser Sensors
Housing material	Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating temp	-10 to 50°C (14 to 122°F)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Battery charging temp	0 to 40°C ( 32 to 104°F)
Relative humidity	10 – 90%
Weight	192 g (6,8 oz) with battery
Dimensions	92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x x 1,3 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Laser	650 nm class II diode laser
Laser line fan angle	6°
Laser line width (1/e²)	1.6 mm
Laser line divergence (full angle)	0.25 mrad
Laser power	< 1 mW
Measurement distance	Up to 10 m
Detector	2^nd generation digital sensor
Detector length	30 mm ( 1,2 in )
Detector angular subtense	30 mrad/m (3 mm/100 mm per meter)
Detector resolution	1 µm
Measurement accuracy	0,3% ± 7 µm
Signal processing	Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protection	Optical filtering and digital ambient light signal elimination
Inclinometer:	Dual High-Performance MEMS inclinometers
Inclinometer resolution	0,01°
Inclinometer accuracy	±0,2°
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy	±1°
Total measurement axis’s (M3+S3 unit)	14
Wireless communication	Class I Bluetooth transmitter
Communication range	10 m (33 ft)
Peripherals – User accessible	1 USB Mini port (IP 67); Charging: 5V, 0,5A Communication: with separate USB/RS 485 adapter cable
Power supply	High-performance Li-Ion battery or external power.
Operating time	17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	8 h
LED indicators	Unit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*

Shaft brackets
Fixture	V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material	Anodized aluminum
Shaft diameter	Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains)
Rods	4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in)


R2 Sensor (receiver)
Housing material	Anodized aluminum and ABS plastic
Operating temperature	0 to 50°C (32 to 122°F)
Storage temperature	-20 to 70°C (-4 to 158°F)
Relative humidity	10 – 90%
Weight	172 g (6.07 oz)
Dimensions	94 mm x 50 mm x 44 mm (3.7 in x 2.0 in x x 1.7 in)
Environmental protection	IP 65
Detector	2-axis PSD
Detector size	20 mm x 20 mm (0.8 in x 0,8 in)
Detector resolution	1 µm
Measurement accuracy	1% ± 3 µm
Ambient light protection	Optical filtering and ambient light signal rejection
Inclinometer resolution	0.01°
Inclinometer accuracy	±0.1°
Wireless communication	Class I Bluetooth transceiver with multi-drop capability. BLE Bluetooth Low Energy (BT 4.0) and Classic Bluetooth.
Communication range	10 m (33 ft)
Connectors	1 USB Micro port (IP67) Charging: 5V, 0,5A
Power supply	High-performance Li-Ion battery.
Operating time	12 hours continuous use
Battery Charging time (system off, room temperature)	8 hours
Battery Capacity	10.4 Wh
LED indicators	Unit state, battery status, and Bluetooth status.


T21 Transmitter
Housing material	Anodized aluminum
Operating temperature	0 to 50°C (32 to 122°F)
Storage temperature	-20 to 70°C (-4 to 158°F)
Relative humidity	10 – 90%
Weight	1150 g (2.54 oz)
Dimensions	100 mm x 103 mm x 109 mm (3.9 in x 4.0 in x 4.2 in)
Laser	650 nm class II diode laser
Laser power	< 1 mW
Measurement distance	Up to 20 m (66 ft)
Laser sweep flatness	±0.02 mm/m
Angular prism accuracy	±0.02 mm/m
Spirit level resolution	0.3 mm/m
Power supply	2 batteries type LR6 (AA)
Warming uptime	10 min
Operating time	15 hours
Note: Specifications are preliminary and subject to change without notice.

Accessories


Extension Fixture, 49 mm Extension Fixture, 94 mm For mounting the measurement units in limited spaces.	Magnetic Base For faster mounting on large diameter shafts	Magnetic Brackets For limited space, where V-brackets with chains cannot be used.

Thin Chain Fixture For mounting the measurement units in limited spaces.	Fixture for Non-Rotating Shafts For machines with no or limited shaft rotation.	Protective foil for the display screen Protects your display screen which will last longer.

Rod stabilizer Used together with the extra-long rods.	Rod kit 4 x 100 mm Can be used as extension rods.	Rod Kit Extra-long rods in titanium, 2 x 250 mm and 2 x 500 mm.

Chain 8 mm 60 links Can be used as an extension chain. Delivered with hooks.	Offset fixtures and software Complete set of fixtures and software for alignment of offset mounted machines/cardan coupled machines.	OL2R fixtures with software For the measurement of dynamic movements from offline to running conditions

Runout probe A smart displacement probe for safe and reliable measurement of axial and radial runout.	FIXTURLASER Level A measuring sensor used for leveling machines or machine parts during installation.