 |
Straightness measurements with the Arc Angle method are made by setting the laser beam roughly parallel to a centre line.
Two points are used as references. The program allows for up to 99 points to be measured.
|
|
The sensor is placed in three to nine positions at each measurement point to find the centre of the measurement object. For the Arc Angle measurements the detector is in a single-axis mode.
Typical applications are half bore measurements, e.g. compressors and turbines with split casings.
|
 |
Express Configuration
- Quick and easy to configure
- Pre-defined configuration
|
 |
Express Measurement
- Distinct overall view of the measurement
- Instant display of measurement results
- Color coded measurement points
- Measurement points can be registered in any order you prefer
|
 |
Express Adjustment
- Live values during the adjustment phase
- The angle guide displays the accepted (green) measurement point registration area
- Green arrows show you in which direction to adjust towards zero
- Color coded measurement values
|
