Languages

Fixturlaser Runout Probe, the perfect accessory to your Fixturlaser NXA

Fixturlaser Runout Probe

Fixturlaser Runout Probe is a battery-powered measuring probe that connects wirelessly via Bluetooth to Fixturlaser NXA display unit.

 MAX-MINSensor display Fixturlaser Runout Probe

The Fixturlaser Runout Probe can be used for operations like:

 

  • Axial and radial runout checks on flanges
  • Checking movements on machine feet (soft foot)
  • Liftcheck
  • Checking movements due to pipe strain
  • Thermal growth on machine casings
  • Eccentric or skewed mounting of coupling hubs
  • Checking bore shafts

 LVDT sensor with ± 2,5 mm measurement range with high precision 

Fixturlaser runout probe

Fixturlaser Runout Probe is a LVDT sensor with ± 2,5 mm measurement range with high precision (within 0.001 mm). The measuring sensor and battery assembly are enclosed and have a sealing class of IP65 which will withstand coolant and oil. The built-in battery is charged using a USB micro connector and has an operating time of 11 hours. The enclosure for the battery box contains built-in magnets that allow the device to be easily attached to the measuring stand. 

 

 

USER INTERFACE


screenshots fixturlaser runout probe

 

 

Fixturlaser runout probe

Housing, material: ABS Plastic
Operating temperature: 0 to 40°C (32 to 104 °F)
Weight: 142 g (5,01 oz)
Battery unit dimensions: 44 mm x 91 mm x 33 mm
(1.7” x 3.6” x 1.3”)
Measuring pen dimensions: Length: 85 mm. (3,34”)
Diameter: 8 mm (0,31”)
Cable length: 400 mm (15,7”)
Enclosure protection class: IP 65 (dust proof and protected again water jets
Measuring force: 0,70 N ± 25%
Repeatability: 0,15 µm
Measurement accuracy: ±MAX(5+|2*K|;|7*K|) µm
Diameter, measuring tip: Ø 3 mm (0,12”)
Thermal drift: 0,25 µm/°C
Wireless communication: Bluetooth transmitter/receiver Class I
Communication range: 10 m (33 ft)
Operating time: 11 hours of continuous operation
Battery charging time: 8 hours (at room temperature with system OFF)
Battery capacity: 10,4 Wh